1-888-551-3082 | 1-919-443-0207 | [email protected]

SG-A3.150.024-00.000

SG Synchronous Servo Motors

  Call For Quote
Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping
Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

The Bosch Rexroth Indramat SG-A3.150.024-00.000 is a high­performance servo motor within the SG Synchronous Servo Motors series, engineered for precision motion control in industrial automation environments. Its brushless design and wound stator architecture deliver reliable torque generation with minimal maintenance requirements. The compact form factor and moderate weight of 2.4 kg facilitate integration into space­constrained machinery without compromising structural stability. With a Protection Type of IP20 according to EN 60 529, the unit provides ingress protection suitable for controlled factory settings. Built to operate seamlessly across a wide ambient spectrum, this servo motor supports dynamic positioning, acceleration, and velocity control with exacting repeatability.



The technical specification of the SG-A3.150.024-00.000 is defined by a Nominal Voltage of 230 V AC ±10%, 50/60 Hz and a Clock Frequency of 10 kHz for digital commutation. Continuous current handling is rated at 3.5 A without fan and up to 6 A with fan, while the Peak Output Rating reaches twice the continuous rating for 1-second intervals at 25% duty cycle. Power dissipation is constrained to 13 W under normal operating conditions, maintaining thermal stability. The servo motor’s Climatic Classification is 3K3 acc. to EN 60 721, ensuring reliable performance in polluted or humid atmospheres. Mechanical interfaces include a Shaft Dimension of Ø 11 x 23 mm, with an Installation Altitude limit of ≤ 1000 m above sea level.



Operationally, the SG­A3.150.024­00.000 excels in temperature resilience, supporting an Temperature Range (operation) from 0 °C to +55 °C and a storage range down to -25 °C up to +70 °C. The motor’s Torque At Standstill is specified at 1.7 Nm, allowing secure load holding without motion. Its cooling strategy accommodates a dedicated fan installation (see Cooling Type section 4.6) to maintain efficiency during high­duty cycles. Mechanical robustness is provided by precision bearings and wound stator construction, ensuring low vibration and extended service life. Compact dimensions and optimized power loss yield rapid thermal recovery following transient overloads and peak loads.



System integration of the SG-A3.150.024-00.000 is straightforward with Bosch Rexroth Indramat drive controllers, facilitating digital feedback loops and advanced tuning profiles. Its configuration flexibility makes it ideal for packaging machinery, assembly robots, and CNC applications requiring sub-millimeter positioning accuracy. The combination of SG Synchronous Servo Motors series reliability and defined technical parameters supports deployment across automotive production lines, semiconductor handling, and precision material processing. Engineers benefit from standardized mounting and electrical interfaces that reduce commissioning time and simplify maintenance cycles.

Technical Specifications

Climatic Classification
3K3 acc. to EN 60 721

Clock Frequency
10 kHz

Continuous Current Rating (no Fan)
3.5 A

Continuous Current Rating (with Fan)
6 A

Cooling Type
For fan installation, see section 4.6

Installation Altitude
≤ 1000 m above sea level

Nominal Voltage
230 V AC ±10%, 50/60 Hz

Peak Output Rating
2x continuous rating for t=1 sec, 25% ED

Power Loss
13 W

Protection Type
IP 20 acc. to EN 60 529

Shaft Dimension
Ø 11 x 23 mm

Temperature Range (operation)
0 °C to +55 °C

Temperature Range (storage)
-25 °C to +70 °C

Torque At Standstill
1.7 Nm

Weight
2.4 kg

Shipping & Payment Options
DHL-logo FexEd-logo UPS-logo freight-icon

AmEx-icon Mastercard-icon Visa-icon wire-transfer-icon
Warranty
1-year-warranty
Indramat USA 1 Year Warranty
Repair
product repair We offer a repair service for the SG-A3.150.024-00.000.
Indramat Is Trusted By
motion-industries-logo
3m-logo
IBM-logo
GexPro-logo
caterpillar-logo
nasa-logo
ford-logo
vallen-logo