The Bosch Rexroth R911294602 (HVE04.2-W075L) is part of the HVE series power supplies, specially designed to operate with unregulated DC bus voltage. It can connect to Rexroth motors with continuous mechanical power reaching up to 60 kilowatts, while a built-in bleeder helps absorb regenerated energy. The power supply's output varies with its input voltage; it has a nominal power output of 75 kilowatts and offers continuous power output at varying rates (33-42 kilowatts) for 380/400/440/480 Volts AC. It can also sustain short-term power output (66-84 kilowatts for 30 seconds) and peak power output (99-126 kilowatts for 0.30 seconds) under the same voltage conditions. The R911294602 (HVE04.2-W075L) has an approximate weight of 28 kilograms and its housing has an IP10 protection rating. This power supply should be installed in a modular DIAX04 system and its operation and maintenance should be handled by trained professionals.
Bleeder: Yes Supported Motor Power: Up to 60 kW Operation Voltage: Unregulated DC bus voltage Nominal Power Output: 75 kW Continuous Power Output at 380V/400V/440V/480V: 33 kW/35 kW/38 kW/42 kW Input: Three-phase Short-term Power Output at 380V/400V/440V/480V: 66 kW/70 kW/76 kW/84 kW Peak Power Output at 380V/400V/440V/480V: 99 kW/105 kW/114 kW/126 kW Loading Capacity for External DC Bus Capacitors: Up to 200 mF DC Bus Voltage Range: 530-670 volts AC Approximate Weight: 28 kg Modular DIAX04 Systems Compatible: Yes Cooling Mode: Internal with built-in blower Housing Measurements: 498 x 250 x 262 mm Protection Rating: IP 10 Installation Inside Industrial Cabinet: Required Operation and Maintenance: Trained professionals only.